What is a modular barn? A modular barn has factory built components (walls, doors, etc.) that can be assembled into almost any configuration, from a modest one-stall backyard barn to a complex equestrian showcase. Because they have standard components, a modular barn allows you to build exactly the size barn you need now, and wait to add stalls in the future; when, and if, you need. Additionally, a modular barn can be completely disassembled and rebuilt on your new site.

Why choose a Barnmaster modular barn over a wood barn? Barnmaster barn components are constructed of a galvanized steel and wood laminate combination that is able to withstand the (sometimes constant) kicking and chewing of the most aggressive horses. The galvalume facing on the stall interiors is non-porous, which means lower maintenance and easier clean up. Our components are built to a very high standard in a quality-controlled factory environment where bad weather does not slow down the production.

Barnmaster builds well over a thousand barns per year and is able to buy materials at the best prices available. These savings are, in turn, passed on to their customers.

In summary, a Barnmaster barn is a quality built, low maintenance, affordable barn that can be installed quickly, and affords the owner the flexibility of expansion and/or relocation.

Are these "kit" buildings? No. Barnmaster barns are not kit buildings. Bear in mind that our kick proof walls weigh 500 lbs. each. Each building is custom designed and constructed to meet your specific needs. However, the costs are comparable to so-called "kit" buildings. Barnmaster barns offer maximum flexibility and use materials superior to "kits". The purchaser may do installation, but over 97% of our customers choose to have our factory-trained crew install their barn. We have two working crews to handle the unloading and erection of the barns.

What is the delivery time? Depending on the time of year, our factory takes between 6 to 8 weeks to build and ship your barn. (In January & February, it is closer to 6 weeks - September - December usually takes 8 weeks). Installation time for a standard 6-10 stall barn is less than one week.

What kind of site preparation do these buildings require? All Barnmaster buildings must be erected on a level site. This generally requires grading and site preparation. All Barnmaster buildings must be anchored to concrete. There are three basic options for this: Piers, Ribbon Walls (footers), Slab, or a combination the three. A typical combination might have a slab in the tack and washrooms and aisle way, and a dirt floor with a gravel base in the stalls, with a concrete perimeter around the stall to keep horses from digging underneath wall. Barns & Stables provides foundation plans specific to your barn. Most customers choose a local contractor to do the grading, concrete, electric, and plumbing work. This is the most economical option. Barns & Stables can usually recommend a local concrete contractor who has done work on other Barnmaster barns in your area.

Do I need a Building Permit? "Agricultural Structures", such as horse barns, are currently exempt from the requirement to obtain a building permit in most areas of Virginia and the Carolinas. Local counties cannot override these state statutes. While this is the general rule, there are different interpretations applied to the state law by different localities. More rural counties generally are very easy to get along with. Barns must comply with zoning ordinances such as setbacks. Commercial barns may be required to have a permit, because the public will be involved. It is best to check with your local zoning office first to avoid any additional costs or delays.

Are these barns just for horses? Barnmaster buildings are specifically designed to be safe, strong, and economical housing for horses. However, they have been used to housedogs, exotic animals, carriages, equipment, etc.

Can Barnmaster build a barn with "Living Quarters"? While converting part of a barn to "living quarters" seems like a good idea, there are some problems with this. As a barn, our buildings are very cost competitive. Our barns, however, were never designed to be absolutely weather-tight or insulated with R-Values, to the building requirements of a home.

Living quarters require building permits and must meet residential building code requirements - barns require neither. Barns & Stables would be delighted, though, to provide open space (to add a lounge or bathroom) in a barn for your local contractor to later finish as you designate.